Carefully caught! the three errors of laptop battery maintenance
Posted By admin on January 14, 2009
Submitted by laptop battery in United Kingdom.
See more about apple laptop battery information, go to the URL!
Notebook computer apple a1079 battery is the driving force, if a laptop without the battery, then it is, at best, the performance of a general mobile PC, which can be seen on batteries for notebook computers for this product has an extremely important role in qualitative , but just to play the role of qualitative accessories also are consumables, maintenance work correctly can effectively extending its life, frequent errors in the use of accelerated aging batteries, so that a variety of media has been awash with how to safeguard the battery The article describes the maintenance process is very detailed, but to sum up, huh, huh, all kinds of very similar views, the core content of almost unanimously, is the maintenance of lithium-ion battery has nothing to investigate it? No. Definitely not, I specialized in a number of recent large-scale Web site, battery site devoted to the defense of the large quantities of data collection and collation of data and found that the major media in the current lithium batteries and maintenance methods, there are some errors and questions, so here will venture to suggest their own SHOW out some ideas for everyone to see for those who hope to be able to maintain the existence of errors to provide some correct solution.
Misunderstanding one: notebook lithium battery maintenance should be followed with the basic principles of exhaustion.
That we might not see the maintenance of the principle of maximum, huh, huh, this is actually the most fundamental error view, a simple analysis, this principle is to generate estimates of the nickel-hydrogen batteries and maintenance methods to copy, so that the principle seems to in order to minimize apple a1079 battery memory effect, for those early notebook batteries (nickel-metal hydride or nickel-cadmium) has a good role in the maintenance, but the current mainstream notebooks equipped with the lithium batteries will have the possibility of injury. Li-ion battery is no memory effect, and this point when the major manufacturers will be publicity for the user that this is not the case, lithium battery material is a kind of active material, such material for the temperature, frequency of use and so on are very sensitive battery life after a period of time there will be some of the aging phenomenon, the performance of the most intuitive to use less time, why is it so what?
Natural wear and tear is one of the important reasons, but to safeguard them realize their own is also an important reason for this phenomenon, over-charging and over-discharge reduction will be rapid cell activity, although the user to safeguard the process of discharge and recharge far less than over the standard (because the internal lithium battery protection circuit, the full protection of the excessive charge and discharge), but there are no user thought of their own around this phenomenon, sometimes under WINDOWS showed 20 percent battery capacity there, you can use 30 minutes, but a sudden about the machine will automatically shut down, and confused at the same time to consult experts, experts will tell you this is because the aging batteries, a1079 battery protection circuit can not be good to monitor the real capacity of the battery, why is this so? Combination I have to tell you the truth, then you begin to guess, such a protection circuit in the end how much credibility? Have mentioned the phenomenon of excessive discharge is one of the most intuitive, so that you can completely break a conceptual mistake: In the day-to-day normal battery depletion, the protection circuit will be more inaccurate, this time if you insist fully charge and discharge the maintenance of the principle, then I believe this has been the approach of battery life, then there is no such intuitive performance when there is no damage to the battery it? I decline to comment on this, but hope that we seriously consider the result of the above-mentioned reasons for automatic power-down if only the natural wear and tear factor inside.
Therefore, in this writer to provide a correct maintenance of the principle of One:
Do not deliberately use the requirements to 100% charge, used to do the maintenance of automatic shutdown, but the best use about 20% began rechargeable apple a1079 battery, charging about 98 percent can stop the charge (a hurry to use the circumstances, I do not object to fully charged), the battery will not cause harm, if the machines have the power calibration procedures can choose to 1-2, then correction months again, so to protect and give full play to the role of the circuit.
Misunderstanding of the Second: The new lithium batteries need to buy 3 times the activity can be fully charged fully activated
If you can accept my point of view mentioned above, you probably will find this the point of view is nonsense. Activation? Lithium battery factory when the natural wear and tear in order to avoid causing damage to the battery, with a certain amount of electricity, so that the activation of work in the factory has been fully completed (the process must be activated in the absence of protection circuits exist to complete), try Imagine, with its own lithium battery circuit protection circuit, this circuit is aimed at avoiding the excessive charge and discharge the battery, then you use a protection circuit for the lithium-ion battery for up to 10 hours of charging, Oh, how ridiculous things, when the charge light went out, had refused to charge the battery, you plug it again flying into the red is not a trace of electricity, so it is said to activate and extremely ridiculous, completely apply a set of nickel-hydrogen batteries, trust A statement of responsibility. In order to verify the author of this argument, you can install a software called BATTERY MON, when the lights went out charging when the battery case in his column can be seen on the status of the battery for the line but there is no charge. There is also a more intuitive approach, when the battery charge will be fever, when you follow that manufacturers charge after 10 hours and then touch your batteries, hot? In other words, if really want to charge 10 to activate a few hours, then, and really be able to charge more than 10 hours on the electric power, then, even with a slow charge, the a1079 battery has also been bombed.
So I would like to put forward the principle of maintaining a correct bis:
Do not need to say in accordance with the manufacturers of the battery for 10 hours to activate the battery charge activity, used to use is a better principle, but because of prolonged storage, the battery would be appropriate to reduce the activity, the use of a time when the best first battery is fully charged before use.
Misunderstanding three: do not use the battery when the battery is removed it would be preferable to avoid over-charging.
The origin of the error appears to be a knock-on effect, so that seems to have the wrong point of view I do not elaborate on for everyone, and is already a natural mistake, over-charging for a well-designed lithium battery is not exist, and this that is the reason why there should be protection circuit one of the reasons, or the above-mentioned reason, as long as the charging indicator light has been extinguished on the charge that there is no action, and over-charging problem no longer exists, but not for long battery for use, or not so good, because the protection circuit and between the batteries have a certain degree of measurement error, this time the best way is to calibrate the battery calibration procedures, and then use.
So I would like to put forward a correct maintenance of the principle of three:
You can rest assured that the battery placed in the machine is not the existence of over-charging problem, but there is a need to note that the lithium batteries in the overheated environment will speed up the pace of aging, if you are using a notebook designs are imperfect, the battery and the CPU, hard disk, such as fever placed very close to big, then it is possible to accelerate the aging, if you frequently do not use exactly the words or the apple a1079 battery to discharge (in some cases, electricity, such as 40%), to prevent overheating of the damage caused by lithium batteries.
Finally, as we use to provide some suggestions:
1: full charge, can be used at any time, but it should be possible to reduce the number of charge and discharge, or frequent power plug adapters, because the design of lithium-ion battery charge and discharge frequency is fixed, and only 300-500 times more time on the less time
2: avoid extreme temperatures is to safeguard the lithium batteries the best way to avoid the a1079 battery in extreme temperatures to use, preservation, as much as possible kept in cool place.
3: to maintain a good use of mentality, for goods not to place undue wear and tear, deliberate pursuit of perfection maintenance, natural wear and tear is a very normal thing, just like people, like sickness and death, 02 phones.
Comments
Leave a Reply